| Peer-Reviewed

Experimental Investigation into Response of Circular Plates Subjected to Hydrodynamic Shock

Received: 17 August 2014     Accepted: 22 August 2014     Published: 10 September 2014
Views:       Downloads:
Abstract

In this paper, plastic deformation of the clamped mild steel and aluminum circular plates subjected to different hydrodynamic impact loading conditions are investigated. Extensive experimental tests were carried out by using a drop hammer. The experimental results presented in terms of central deflection of the plates, deflection profiles, and strain distributions. The effect of different parameters such as material properties, plate thickness, stand off distance of hammer or the transferred energy were also investigated on behavior of deformation of plate.

Published in International Journal of Mechanical Engineering and Applications (Volume 2, Issue 3)
DOI 10.11648/j.ijmea.20140203.12
Page(s) 43-46
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Deformation, Circular Plate, Hydrodynamic, Drop Hammer, Shock

References
[1] H. Babaei, A. Darvizeh, Investigation into the Response of Fully Clamped Circular Steel, Copper, and Aluminum Plates Subjected to Shock Loading, Mechanics Based Design of Structures and Machines, 39(4), p,507-526, 2011.
[2] H. Babaei, A. Darvizeh, Experimental and analytical investigation of large deformation of thin circular plates subjected to localized and uniform impulsive loading, Mechanics Based Design of Structures and Machines, 38, p,171–189, 2010.
[3] D.J.Mynors, B.Zhang, Applications and capabilities of explosive forming, J. Mat. Proc. Tech, 125 –126:1–25, 2002.
[4] H.P., Tardif, Explosive forming of cones by metal gathering. Metal progress, 76 (3), p.84, 1959.
[5] S., Thiruvarudchelvan, , and W., Lewis, , A note on hydro forming with constant fluid pressure, J. Mater. Process. Technol. 88, pp. 51–56, 1999.
[6] D., Kang, L., Lang, X., Meng, and J., Xuan, 'Hydrodynamic deep drawing process', J. Mater. Process. Technol. 101 (1–3), pp. 21–24, 2000.
[7] O.E. Kosing, B.W. Skews, An investigation of high-speed forming of circular plates in a liquid shock tube. International Journal of Impact Engineering, 21(9), p, 801-816, 1998.
[8] Lange, K., Handbook of Metal Forming, Second Printing, McGraw-Hill, NewYork, 1994.
Cite This Article
  • APA Style

    Hashem Babaei, Abolfazl Darvizeh, Majid Alitavoli, Milad Hoseini, Tohid Mirzababaie Mostofi. (2014). Experimental Investigation into Response of Circular Plates Subjected to Hydrodynamic Shock. International Journal of Mechanical Engineering and Applications, 2(3), 43-46. https://doi.org/10.11648/j.ijmea.20140203.12

    Copy | Download

    ACS Style

    Hashem Babaei; Abolfazl Darvizeh; Majid Alitavoli; Milad Hoseini; Tohid Mirzababaie Mostofi. Experimental Investigation into Response of Circular Plates Subjected to Hydrodynamic Shock. Int. J. Mech. Eng. Appl. 2014, 2(3), 43-46. doi: 10.11648/j.ijmea.20140203.12

    Copy | Download

    AMA Style

    Hashem Babaei, Abolfazl Darvizeh, Majid Alitavoli, Milad Hoseini, Tohid Mirzababaie Mostofi. Experimental Investigation into Response of Circular Plates Subjected to Hydrodynamic Shock. Int J Mech Eng Appl. 2014;2(3):43-46. doi: 10.11648/j.ijmea.20140203.12

    Copy | Download

  • @article{10.11648/j.ijmea.20140203.12,
      author = {Hashem Babaei and Abolfazl Darvizeh and Majid Alitavoli and Milad Hoseini and Tohid Mirzababaie Mostofi},
      title = {Experimental Investigation into Response of Circular Plates Subjected to Hydrodynamic Shock},
      journal = {International Journal of Mechanical Engineering and Applications},
      volume = {2},
      number = {3},
      pages = {43-46},
      doi = {10.11648/j.ijmea.20140203.12},
      url = {https://doi.org/10.11648/j.ijmea.20140203.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20140203.12},
      abstract = {In this paper, plastic deformation of the clamped mild steel and aluminum circular plates subjected to different hydrodynamic impact loading conditions are investigated. Extensive experimental tests were carried out by using a drop hammer. The experimental results presented in terms of central deflection of the plates, deflection profiles, and strain distributions. The effect of different parameters such as material properties, plate thickness, stand off distance of hammer or the transferred energy were also investigated on behavior of deformation of plate.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Experimental Investigation into Response of Circular Plates Subjected to Hydrodynamic Shock
    AU  - Hashem Babaei
    AU  - Abolfazl Darvizeh
    AU  - Majid Alitavoli
    AU  - Milad Hoseini
    AU  - Tohid Mirzababaie Mostofi
    Y1  - 2014/09/10
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijmea.20140203.12
    DO  - 10.11648/j.ijmea.20140203.12
    T2  - International Journal of Mechanical Engineering and Applications
    JF  - International Journal of Mechanical Engineering and Applications
    JO  - International Journal of Mechanical Engineering and Applications
    SP  - 43
    EP  - 46
    PB  - Science Publishing Group
    SN  - 2330-0248
    UR  - https://doi.org/10.11648/j.ijmea.20140203.12
    AB  - In this paper, plastic deformation of the clamped mild steel and aluminum circular plates subjected to different hydrodynamic impact loading conditions are investigated. Extensive experimental tests were carried out by using a drop hammer. The experimental results presented in terms of central deflection of the plates, deflection profiles, and strain distributions. The effect of different parameters such as material properties, plate thickness, stand off distance of hammer or the transferred energy were also investigated on behavior of deformation of plate.
    VL  - 2
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Department of Mechanical Engineering, Faculty of Engineering, University of Guilan, Rasht, Iran

  • Department of Mechanical Engineering, Faculty of Engineering, University of Guilan, Rasht, Iran

  • Department of Mechanical Engineering, Faculty of Engineering, University of Guilan, Rasht, Iran

  • Department of Mechanical Engineering, Faculty of Engineering, University of Guilan, Rasht, Iran

  • Department of Mechanical Engineering, Faculty of Engineering, University of Guilan, Rasht, Iran

  • Sections